Then, by simply applying the pump head to the valve on your wheel and releasing the air tap, a fast high volume shot of air is released to instantly mount the tyre onto the bead. Potential buyers who choose to go that route, however, might also want to consider the RideAir or Airshot canisters, both of which can be pre-charged using a floor pump. "Airshot, gives you the ability to charge an air bottle quite easily using a normal track pump. The thought of struggling to mount a tyre on the bead with a track pump, or using expensive CO2 cartridges, to inevitably give up (after much cursing and perspiration if you are like me) and take the wheels to a bike shop, an expense that really does add up! "However, there is one major downside associated with the use of tubeless, which can outweigh the benefits. Tell us some more about the technical aspects of the product?Īirshot says: "Tubeless tyres have become popular due to the obvious associated operational advantages of, amongst others: running lower pressures puncture resistance and, overall weight reduction. The Specialized tubeless cyclo-cross tyres on the Crux I tested recently required a bit of jiggery-pokery with a track pump, but the Airshot did the trick first time. I tried it on a fat Schwalbe mountain bike tyre that was refusing to inflate with a track pump, and it went straight up first time. In the instances when the tyre is being stubborn, the Airshot worked a treat. Airshot : Material Aluminum : Item Weight 445 Grams : Item Dimensions LxWxH 2.95 x 2.95 x 14.57 inches : Power Source Handheld : Maximum Pressure 160 Pound per Square Inch : Item Package Dimensions L x W x H 15 x 4.61 x 3.15 inches : Package Weight 0.6 Kilograms : Brand Name Airshot : Model Name Tubeless Tire. Few people have a compressor to hand, though. There are a few tricks that can help when the tyre won't inflate: using an inner tube to get one tyre bead seated, adding a layer of Gorilla tape to take up any slack in the tyre, or using a compressor. Other times, no amount of frantic pumping or swearing will do it. Sometimes a tubeless tyre will inflate on the rim first time, using a track pump. Use the track pump to fill the canister with 100-120psi of air, flick the lever, and hey presto, watch as the air rushes into the tyre and inflates it in an instant. While the canister can be used without this neoprene. The Airshot is basically just a metal canister with a hose on the top that you attach a track pump to, and another hose that you attach to the valve on the wheel. This optional add-on for the Airshot inflator device protects the canister and keeps it looking new. Using the Pump is easy enough, simply use your Track Pump to blow the Airshot Canister up to 130psi, attach the pipe to your valve and then open the release. It is a little expensive for a product that ultimately you might not use a lot, though. The Airshot makes inflating even the most stubborn tubeless tyre a painless exercise, with a sudden and rapid flow of air that seats a tyre first time every time. Often this is simply because you can't get air into the tyre quickly enough. I love tubeless, but getting a tubeless tyre to inflate and stay seated on a tubeless compatible rim can be tricky.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |